The importance of the pump to increase the agricultural water pressure
- Irregular distribution of water in the drip or rain irrigation system
- Indiscriminate consumption of water in parts close to the source
- Reduction in quality and quantity of products
- High working pressure of pipes and possibility of bursting
Pump performance to increase agricultural water pressure
Advantages of using a pressure booster pump in agriculture
1. Increasing irrigation efficiency
2. Improve plant growth
3. Energy and cost savings
Modern pumps supplied by Tawhid Pump are designed with high efficiency and reduce electricity consumption to the lowest possible level.
4. Can be used in different situations
Whether your land is in the mountains or in the plains, pressure booster pumps can be adjusted according to the conditions of height, flow and water hardness.
Types of pumps to increase agricultural water pressure
In the agricultural market, several types of pressure booster pumps are more common. Knowing their difference will help you make a more accurate choice.
Centrifugal pump
The most common type of pump is to increase the pressure in irrigation networks. These pumps have a rotating impeller that directs the water from the center to the surroundings with pressure. It is suitable for medium farms and general irrigation systems.
Jet Pump
This type of pump is used to suck water from a great depth and can extract water from semi-deep wells in addition to increasing the pressure.
Submersible pump
The engine and its body are located in the water and directly provide the appropriate pressure and flow rate for irrigation. It is an excellent option for deep wells and large areas.
Booster pump or booster pump
In fact, it is a combination of several parallel pumps designed for high pressure and continuous consumption. Tawhid Pump offers a variety of booster systems for gardens and large farms.
Guide to choosing a pump to increase agricultural water pressure
When choosing a pump, several important parameters should be considered so that the device fits the needs of your land. Next, we examine the most important criteria:
1. required discharge
The amount of water output per unit of time (usually in liters per minute or cubic meters per hour) determines the capacity of the pump.
2. Pump head (pumping height)
The head determines how high the pump can raise the water. The steeper the terrain or the greater the distance from the source, the higher the head needed.
3. Type of irrigation system
In the drip system, pressure accuracy is more important; While for flood or rain irrigation, high discharge plays a key role. The technical consultants of Tawheed Pump can recommend the right pump for your type of irrigation with a detailed investigation.
4. Water source and its characteristics
If your source is a pool, surface centrifugal pumps are sufficient, but for deep wells, submersible or jet pumps should be used.
5. Type of energy consumption
In areas with three-phase electricity, industrial pumps are more efficient; But in gardens and small farms, single-phase models can be used.
Technical characteristics of Tawheed Pump brand pumps
Agricultural pumps Tawhid Pump are produced according to current standards and have distinct advantages over similar brands:
- Resistant design with cast iron or stainless steel body
- High efficiency motor and efficient cooling system
- Ability to withstand high temperature in water and tropical environment
- Presence of anti-leakage mechanical flood and balanced propellers
- Low noise and vibration-free operation
The pumps of this brand are available in single-stage, multi-stage, floating and booster models and are designed to suit the different geographical conditions of Iran.
How to install the water pressure booster pump correctly
For maximum efficiency, the correct installation of the pump is vital. Paying attention to the following points will increase the life and reduce the depreciation of the equipment.
- Placement in a dry and level place: The pump should be installed on a flat surface and near the water source to reduce vibration.
- Using the right pipe: The diameter of the inlet and outlet pipe should be chosen according to the pump power to maintain the optimal pressure.
- Electrical protection: Installing a thermal switch or automatic relay It is necessary to prevent the engine from burning.
- Filter or water filter: To prevent suspended particles from entering the pump, it is recommended to install a filter before the inlet.
- Initial test: After installation, test the pump with a small amount of water to check the direction of rotation and output pressure.
Periodic pump maintenance and service
Agricultural pumps need regular checkups due to continuous use in humid and dusty environments.
Periodical service stages are:
- Cleaning the filter and the inlet path
- Checking the health of the mechanical seal
- Controlling the engine temperature during operation
- Replacing the oil or grease of the bearings at least once every 6 months
- Checking the cables and electrical connections
Specialized service at Tawheed Pump agencies increases the lifespan of the device and prevents sudden expenses.
Common errors in the operation of the pressure increase pump
Output pressure lower than expected
Cause: the presence of air in the system, blockage in the inlet or wear of the impeller.
Solution: venting the pump and cleaning the entrance path.
Loud noise or vibration
Cause: incorrect installation, lack of alignment of the body or loose screws.
Solution: fixing connections and using anti-vibration base.
Engine overheating
Cause: continuous work without interruption or excessive pressure.
Solution: check the voltage and use the appropriate cooling system.
The effect of pressure boosting pump on farm productivity
Using a pump to increase agricultural water pressure is not only an auxiliary equipment, but the main factor in increasing the yield and sustainability of agricultural production. According to field investigations, the installation of high pressure pumps from the brand Tawhid Pump has increased water efficiency by 35%.
In areas where the ground is sloping or the input pressure from the source is low, the effect of these pumps becomes more noticeable. By controlling the constant pressure, not only the life of the pipes is increased, but also the electricity and repair costs are reduced.
Why buying a pump from Tawheed Pump is the best choice
Tohid Pump is the leader in this field in Iran with years of experience in the production, supply and sale of specialized agricultural pumps. The advantages of buying from Tawheed Pump include the following:
- Free consultation to choose the right model based on farm conditions
- Providing authenticity guarantee and after-sales service
- Providing original spare parts and fast repair
- Telephone and face-to-face support throughout the country
All Tawheed Pump pumps are designed with special technical tests to maintain their durability and efficiency in the harshest environmental conditions.
summary
If you plan to irrigate your farm or garden economically and intelligently, installing a pump to increase agricultural water pressure is a necessary choice. These equipments have a direct role in the quality of irrigation, saving resources and increasing production.